The FOUNTAIN

Hi Everyone,

I saw an interesting video today on youtube titled, "CFD of a fountain pool", done in Fluent using VoF. So This idea then came up to my mind to try solving this in OpenFOAM. And boy, i really did get started with this. The geometry was already there in the video ( thanks to Denis17488, who uploaded the video ) and can be seen below as an image,

Geometry Model

As I like doing most of the things on an open source platform, I used Gmsh to create the geometry and Mesh ( Hex ) as well,

Geometry and Boundary conditions - Gmsh

Hex Mesh generated in Gmsh

InterFoam which a Volume of Fluid (VoF) based solver is used for this analysis.
I have used a ramped sort of boundary condition which allows to change velocity with time. In the Velocity file inside 0 folder, include this boundary condition as shown below

 inlet
{

 type         uniformFixedValue;
 uniformValue    table
    (
    (0 (0 1 0))
    (1 (0 2 0))
    (2 (0 3 0))
    (3 (0 4 0))
    (4 (0 4 0))
    (5 (0 0 0))
    );
}

Simulation was ran for 10 sec. Image shown below is at t = 2sec.

Time = 2 sec

Animation for the same can be found here : https://youtu.be/cPEa4jQAWMA

Compiling CUDA solvers in Foam Extend v 3.2

Today's computing world is slowly and steadily shifting from CPU to GPU. With the availability of resources at much lower rates then some years ago and the need for faster + efficient computing has resulted computational scientist to broaden their view of using GPU for computation and not see it just for gaming purpose.

The OpenFOAM extend group has contributed to this by adding libraries for solvers to harness the power of GPU. I have an NVIDIA GeForce GTX 650 Ti 2GB Graphics card and first wanted to compile the cudaSolvers in foam-extend.
So some of the basic steps which are required for compilation are as shown below :

1. Install NVIDIA cuda libraries for your system ( https://developer.nvidia.com/cuda-downloads ). 

2. After this before compiling foam-extend source the environment variable for compiling cuda solvers. On the terminal type the command below and hit enter

export CUDA_ARCH=sm_30

3. Compile foam-extend by running the ./Allwmake.firstInstall script

4. Once the compilation is finished we can now compile the CUDA solvers separately by running the Allwmake file inside $FOAM_SRC/cudaSolvers

5. But wait, this might still throw up some errors. So we need to complete a few more steps before compiling cudaSolvers

a ) Set the path for CUDA nvcc. You can save these lines in you etc/bashrc file so you can save time exporting these everytime you need to run the cuda based solvers

export set PATH=/usr/local/cuda-7.5/bin:$PATH

export set LD_LIBRARY_PATH=/usr/local/cuda-7.5/lib64:$LD_LIBRARY_PATH

b ) You will also require CUSP for compiling the cuda libraries

cusp library v0.4.0

Download it from : https://github.com/cusplibrary/cusplibrary.git

Rename the zip file as " cusp " .This library needs to be saved inside the cuda directory in /usr/local/cuda-7.5

c ) I had some trouble while compiling the cudaSolvers, but when I checked options file in Make directory my error was solved. Basically we need to set the CUDA_INCLUDE_DIR path to include all the required files for running cudaSolvers.

export CUDA_INCLUDE_DIR=$CUDA_DIR/include

d ) Now compile the cudaSolvers , and once it says that

'libcudaSolvers.so' is up to date

Your work is done

Now my next task would be to work with these solvers and check how fast the cuda libraries work for OpenFOAM extend.

Compiling CUDA solvers in Foam Extend v 3.2

Today's computing world is slowly and steadily shifting from CPU to GPU. With the availability of resources at much lower rates then some years ago and the need for faster + efficient computing has resulted computational scientist to broaden their view of using GPU for computation and not see it just for gaming purpose.

The OpenFOAM extend group has contributed to this by adding libraries for solvers to harness the power of GPU. I have an NVIDIA GeForce GTX 650 Ti 2GB Graphics card and first wanted to compile the cudaSolvers in foam-extend.
So some of the basic steps which are required for compilation are as shown below :

1. Install NVIDIA cuda libraries for your system ( https://developer.nvidia.com/cuda-downloads ). 

2. After this before compiling foam-extend source the environment variable for compiling cuda solvers. On the terminal type the command below and hit enter

export CUDA_ARCH=sm_30

3. Compile foam-extend by running the ./Allwmake.firstInstall script

4. Once the compilation is finished we can now compile the CUDA solvers separately by running the Allwmake file inside $FOAM_SRC/cudaSolvers

5. But wait, this might still throw up some errors. So we need to complete a few more steps before compiling cudaSolvers

a ) Set the path for CUDA nvcc. You can save these lines in you etc/bashrc file so you can save time exporting these everytime you need to run the cuda based solvers

export set PATH=/usr/local/cuda-7.5/bin:$PATH

export set LD_LIBRARY_PATH=/usr/local/cuda-7.5/lib64:$LD_LIBRARY_PATH

b ) You will also require CUSP for compiling the cuda libraries

cusp library v0.4.0

Download it from : https://github.com/cusplibrary/cusplibrary.git

Rename the zip file as " cusp " .This library needs to be saved inside the cuda directory in /usr/local/cuda-7.5

c ) I had some trouble while compiling the cudaSolvers, but when I checked options file in Make directory my error was solved. Basically we need to set the CUDA_INCLUDE_DIR path to include all the required files for running cudaSolvers.

export CUDA_INCLUDE_DIR=$CUDA_DIR/include

d ) Now compile the cudaSolvers , and once it says that

'libcudaSolvers.so' is up to date

Your work is done

Now my next task would be to work with these solvers and check how fast the cuda libraries work for OpenFOAM extend.

12 step guide on Installing OpenFOAM on Mac OS ( El-Capitan 10.11.6 )

I recently purchased a Mac-Book Pro 13'' 2012 Model, an old model but functioning as good as new. Getting a Mac for myself was in my bucket-list and finally I own it now.

Now the First Task was to Install OpenFOAM on this and let me tell you it wasn't easy at all. And finally after almost a week's struggle I have finally been able to Install it on Mac and that too the latest version of OpenFOAM 4.0 with Paraview-5.1.0 !!!!!

As it was a good long struggle for me and since there is no one stop solution for installation let me help you with the Installation. Here are the steps for installing OpenFOAM on Mac OS.

1. Install the homebrew package ( brew.sh ).  This basically is like a onestop package manager for all the dependencies required for Installing OF.

2. Now Install these packages one by one

 $ brew tap hombre/science

 $ brew install open-mpi  --disable-fortran

 $ brew install scotch

 $ brew install cgal

 $ brew install flex
 
 $ brew install boost --without-single --with-mpi

 $ brew install metis

 $ brew install parmetis

 $ brew install https://raw.githubusercontent.com/mrklein/openfoam-os-x/master/formulae/parmgridgen.rb

3. Once done with Installing all these packages ( would take about and hour or more depending on your Internet speed ), Download the latest version of OpenFOAM tar file from the OpenFOAM website or git or bitbucket.

4. Create a disk image using the CLI interface from the command shown below.

$ hdiutil create -size 8.3g -type SPARSEBUNDLE -fs HFSX -volname OpenFOAM -fsargs -s OpenFOAM.sparsebundle

Size key specifies size of the image, as usually I keep all OpenFOAM versions on one image, the size is rather large but as it is sparse image, its size will grow as necessary (for example size of disk image with 6 different OpenFOAM versions is around 6G). Type of the disk image is Sparse bundle as it is more convenient for backup software. Volume name is OpenFOAM, you can change it to anything you like. File system type is set with -fs flag, in the command it is just extended HFS, if you'd like, you can add J letter there to get journaling. And finally -fsargs -s supply -s option to newfs utility that forces it to create case sensitive file system.

5. Mount the Disk Image

First create a directory with the name OpenFOAM

$ mkdir -p OpenFOAM

Now mount the disk image on the newly created folder

$ hdiutil attach -mountpoint $HOME/OpenFOAM OpenFOAM.sparsebundle

6. Extract the tar file into your OpenFOAM directory in home folder

$ cd OpenFOAM && tar xzf ~/Download/OpenFOAM-4.x.tgz

7. Download the Mac OS patch for the specific version you are using and move it into OpenFOAM-4.x directory in your OpenFOAM folder in $HOME

$ cd OpenFOAM-4.x && curl -L https://raw.githubusercontent.com/mrklein/openfoam-os-x/master/OpenFOAM-<VER>.patch > OpenFOAM-<VER>.patch

Here VER refers to your version number

8. Apply the downloaded patch

$ git apply OpenFOAM-4.0.patch

9. Building OpenFOAM

Follow these few steps before you start compiling OpenFOAM

$ mkdir -p $HOME/.OpenFOAM

$ echo 'WM_COMPILER=Clang' > $HOME/.OpenFOAM/prefs.sh

$ echo 'WM_COMPILE_OPTION=Opt' >> $HOME/.OpenFOAM/prefs.sh

$ echo 'WM_MPLIB=SYSTEMOPENMPI' >> $HOME/.OpenFOAM/prefs.sh

$ echo 'export WM_NCOMPPROCS=$(sysctl -n hw.ncpu)' >> $HOME/.OpenFOAM/prefs.sh

$ echo 'export WM_SILENT_RULES=Y' >> $HOME/.OpenFOAM/prefs.sh

$ echo 'WM_LABEL_SIZE=32' >> $HOME/.OpenFOAM/prefs.sh

$ source etc/bashrc

$ [ "$(ulimit -n)" -lt "4096" ] && ulimit -n 4096

$ ./Allwmake > log.Allwmake 2>&1

COMPILATION will take about 2-3 hours


10. Testing your Installation

You can check your Installation with the regular way, by typing icoFoam -help and look out for the message or by typing

foamInstallationTest

This basically checks if all the packages are configured properly by OpenFOAM during compilation

11. Setting up Environment Variable

Sourcing OpenFOAM bashrc file each and every time you login to your system can be quite boring and time consuming. To avoid this copy past these lines into a file named as  :  

openfoam-env-setup.sh and save this on your $HOME folder. Source this file into .profile in your terminal by typing source $HOME/openfoam-env-setup.sh

#!/bin/sh

# If you'd like to setup environment every time terminal is launched
# create .OpenFOAM/OpenFOAM-release file in your home folder. In the file put
# the string with a version you'd like to use. This can be done with:
# $ mkdir -p .OpenFOAM
# $ cat '2.X.Y' > .OpenFOAM/OpenFOAM-release
# If you'd like to switch environment between versions use of2xy commands.

readonly FOAM_MOUNT_POINT="${FOAM_MOUNT_POINT:-"$HOME/OpenFOAM"}"
readonly FOAM_RELEASE_FILE="${FOAM_RELESE_FILE:-"$HOME/.OpenFOAM/OpenFOAM-release"}"
readonly FOAM_DISK_IMAGE="${FOAM_DISK_IMAGE:-"$HOME/OpenFOAM.sparsebundle"}"

mount_disk_image () {
 local oldpwd="$(pwd)"
 cd "$HOME"
 # Attempt to mount image
 hdiutil attach -quiet -mountpoint "$FOAM_MOUNT_POINT" "$FOAM_DISK_IMAGE"
 cd "$oldpwd"
 return 0
}

main () {
 [ -f "$FOAM_RELEASE_FILE" ] || return 1

 local release="$(cat "$FOAM_RELEASE_FILE")"
 local bashrc="$FOAM_MOUNT_POINT/OpenFOAM-$release/etc/bashrc"

 [ -f "$bashrc" ] || mount_disk_image

 if [ -f "$bashrc" ]
    then
  source "$bashrc" WM_NCOMPPROCS="$(sysctl -n hw.ncpu)"
 else
  echo "OpenFOAM $release doesn't seem to be installed."
 fi
}

# Reset environment variables for specified version
ofxxx () {
 local release="$1"
 [ -n "$WM_PROJECT_DIR" ] && . "$WM_PROJECT_DIR/etc/config/unset.sh"
 local bashrc="$FOAM_MOUNT_POINT/OpenFOAM-$release/etc/bashrc"
 if [ -f "$bashrc" ]; then
  source "$bashrc" WM_NCOMPPROCS="$(sysctl -n hw.ncpu)"
 else
  mount_disk_image
  if [ -f "$bashrc" ]; then
   source "$bashrc" WM_NCOMPPROCS="$(sysctl -n hw.ncpu)"
  else
   echo "OpenFOAM $release doesn't seem to be installed."
  fi
 fi
}

of22x () {
 ofxxx "2.2.x"
}

export -f of22x

of231 () {
 ofxxx "2.3.1"
}

export -f of231

of23x () {
 ofxxx "2.3.x"
}

export -f of23x

of240 () {
 ofxxx "2.4.0"
}

export -f of240

of24x () {
 ofxxx "2.4.x"
}

export -f of24x

of300() {
 ofxxx "3.0.0"
}

export -f of300

of301() {
 ofxxx "3.0.1"
}

export -f of301

of30x() {
 ofxxx "3.0.x"
}

export -f of30x

of40() {
    ofxxx '4.0'
}

export -f of40

of4x() {
    ofxxx '4.x'
}

export -f of4x

ofdev() {
    ofxxx "dev"
}

export -f ofdev

pf () {
 paraFoam -builtin > /dev/null 2>&1 &
}

main

12. Restart Terminal !!!!

Now every time you start the terminal just type the alias related to your version

eg. of40

Now, this is for all the MAC users. Do not install packages Macports, it will create issues while compilation since we have installed packages from brew. ( from personal experience )

The Foam version Confusion

Hi Guys,

The Open source CFD seems to be getting more competitive these days and guess what we are now having three different versions of OpenFOAM. Isn't that great but again adding to a bit of confusion as well, which version should I really use. Well lets clarify some of the things for now beginning with the Foam hierarchy as shown below 

Figure taken from a LinkedIn article on OpenFOAM who's who.

Well so as we can see we have three different versions released by the OpenFOAM Foundation, OpenCFD-ESI Group and Foam-Extend. So what really differs in each of these, let find out

1. OpenFOAM 4.0 - This is the official Foam release and has a lot of new features added with it from its previous version. OpenFOAM foundation releases this version and this one seems to be the quickest release ( 6 months ) then all the prior ones. I would always prefer for going for this release to keep the originality.

2. OpenFOAM v1606+ - This version is released by OpenCFD-ESI Group and comes with a lot of      add on solvers used by Industry and some really cool post-processing options as well. The version naming is done as year and month of release with a +. One can look at the features offered by this software and use it for solving problems.

3. foam-extend - Here you will get some of the most extensive solvers which are not available in         either of the above Foam. The solvers are mainly contributed by OpenFOAM users / developers globally.

So finally to end the confusion it really doesn't matter much about what Foam version you want to use till the time it really solves your engineering problem. Once again, happy Foaming!!! :)  

Finally my tutorial on Installation of PyFOAM

What is PyFOAM - A python library to control OpenFOAM-runs and manipulate OpenFOAM-data. Comes with a number of utilities that should make your life easier if you're not scared by commandlines [ source : openfoam wiki / pyfoam]

This is part one of the tutorial series on PyFOAM. There will be a total of 4/5 tutorials following the tutorial on Installation of PyFOAM.

So sit back and keep pyFoaming.... :)

http://spoken-tutorial.org/watch/OpenFOAM/Installing%2Band%2BRunning%2BPyFoam/English/

CFD..thats sweeet

http://www.deskeng.com/de/the-sweet-side-of-simulation-behind-the-scenes-at-nestle/

Well thats how CFD can play a big role in product design and development.

Love for Fighters

My love for aircrafts and fighter planes was altogether put into a completely different level during my Under Graduation days. All thanks to my friend Mr. Neil Mehta, this guy since then has been a source of motivation for me and many others as well. This one is for you buddy.

The Sukhoi Su-30MKI (NATO reporting name: Flanker-H) is a twinjet multirole air superiority fighter developed by Russia's Sukhoi and built under licence by India's Hindustan Aeronautics Limited (HAL) for the Indian Air Force (IAF). A variant of the Sukhoi Su-30, it is a heavy, all-weather, long-range fighter. (source wiki).

GrabCAD has been my best source for finding CAD models and it never disappoints me. The actual CAD model was quite big so I had to scale it down to fit the geometry in my domain and mesh it.

Actual CAD geometry : GrabCAD

snappyHexMesh_1

snappyHexMesh_2

Finally simulations were complete. Presenting to you Flow over an Sukhoi Su 30 MKI  with Streamlines.

Streamlines over Sukhoi Su 30 MKI

OpenFOAM Simulation of flow past FERRARI F 50

snappyHexMesh proves to be a big boon when you have a CAD file ready. Yesterday I tried to study the external aerodynamics of flow past a FERRARI F 50. To get CAD files use this website ( https://sites.google.com/site/garcfd/stl ), you can find some cool CAD files.

I would like to share some of the important things I learnt  while using snappyHexMesh utility.

1. Always use a ".stl" CAD file. Check for any holes in it, if any close them as this can cause issues later while running snappyHexMesh. ( basically a CAD clean up is always good)

2. Use a simple name for your CAD file. Do not name it too complex since we need to use this name multiple times in snappyHexMeshDict file. ( eg, car.stl - short and simple)

3. When you run the case always keep Allrun and Allclean script files ready. This will help you to save time while running the simulations.

4.Finally the most important point. When we create a blockMeshDict file please see to it that the size of the mesh should be uniform in X, Y and Z direction i.e. uniform cube.

Solver : simpleFoam ( implicit solver for incompressible and turbulent flow)

Domain size : 20m X 8m X 8m

 After snappyHexMesh

Velocity Contour : StreamLines

The simulation finally end, and they end quickly since its an implicit solver. For more details please post your comments here.

First OpenFOAM Symposium @ IIT Bombay

FOSSEE, IIT Bombay is organizing its First OpenFOAM Symposium at IIT Bombay, on 27th Feb, 2016. The symposium would feature talks from OpenFOAM users, Students talks and OpenFOAM Workshop.For more details please visit the given link. http://fossee.in/conference/cfd-symposium/

Static Mixer Simulation

Simulation of Static Mixer

A static mixer is a precision engineered device for the continuous mixing of fluid materials. Normally the fluids to be mixed are liquid, but static mixers can also be used to mix gas streams, disperse gas into liquid or blend immiscible liquids.

Simulation was performed using icoFoam as a transient solver. Geometry and Meshing was done using Salome Meca. A coarse mesh was used for this simulation. Turbulence models have not been implemented , but will be done sooner on an improved simulation. 

Cylinder

Bottom cone

 

Extrusion of Bottom conical section for outlet

Inlet faces

Extrusion of Inlet faces

 

Final Geometry of Mixer

Meshing - Tetrahedral meshing using Salome

Velocity Magnitude with Streamlines

Watch the animation here

YouTube link : https://www.youtube.com/watch?v=hHbKx0w35ak

OpenFOAM v3.0.0

OpenCFD released the latest version of one of the most widely used open source CFD softwares OpenFOAM v 3.0.0. The new version has been refurbished with addition of new features, fast algorithms, and few structural changes in the software.

Download http://www.openfoam.org/download/source.php

Trying my hands at SnappyHexMesh ( F1 car simulation )

F1 car - STL file picked from GrabCAD

snappyHexMesh  

Pressure coutour

Velocity Contour

Using OpenFOAM we can easily import stl files and mesh them using snappyHexMesh utility. The stl file used above was taken from GrabCAD ( you can find various CAD files on this site ). I have used simpleFoam here for solving an steady state problem (to save time and energy.. :D ). For more details/discussions you can comment below the post.. Simulation...

MPI vs. OpenMP

Simple explanation of difference between OpenMP and OpenMPI

"Donald Jones" wrote

OpenMP works on SMP systems, whereas MPI works on both SMP anddistributed memory systems (ie, clusters). The codes we use in our officetypically use MPI between cluster nodes and OpenMP on individual nodes(assuming a dual CPU node), and often both at once (launch on 32 nodeswith 2 CPUs per node; OpenMP spawns appropriate portions of the code overboth CPUs).

From my experience, OpenMP has better performance on SMP systems,ignoring MPI implementations that short circuit the TCP/IP stack (eg,SGI's MPI on Origin 3000s). If you will be launching different runs oneach node, then OpenMP will likely offer better performance than MPI.However, if you are going to launch a single job across multiple nodes,MPI is the de facto standard for parallelizing on clusters.

Other difference between OpenMP and MPI is that OpenMP is a fine grainparallelism and MPI is a course grain parallelism. For example, in OpenMPyou most often parallelize over a loop using compile directives, so thecode runs in serial until the loop, runs the loop in parallel, thenreverts back to serial. Conversely, with MPI the entire code is launchedon each node and you control what each code executes based its nodenumber in the MPI universe along with an algorithm that distributes work,eg, a master/slave model.

-------------------------------------------

Parallel computing concepts can be really made simple to understand by such explanation for all CS as well as NON-CS users...

P.S : I was reading about OpenMP and OpenMPI and came across a link which had this explanation.

For F1 Racing lovers...

This seems to be a interesting link showcasing all the latest technology trends in F1 racing..

http://www.f1technical.net/development/?sid=e310ed165d67746f74d9cd1666a659eb

CFD Engine

You surely need to check this out...really interesting stuff for people who love to work in the field of CFD. I Got in touch with the Blog Writer Robin Knowles and I must say, really liked the way in which he has come up with small articles covering all the aspects of CFD + CAD = CAE overall...now isn't that really cool.. :)

https://www.cfdengine.com/blog/#content

Moving Boundary problem in OpenFOAM

Hey Guys, Its really been a long time since I have posted something. I was looking out for some of my old stuff and found out this ( I had uploaded this on youtube 3 years ago. ). Moving boundary in OpenFOAM. It is based on dynamicInkJetFvMesh mesh motion without solving any flow here. We have used a simple rectangular box here with dimension of (6 x 3 ) with 60 cells in the X-direction and 20 in the Y-direction. Use the solver interDyMFoam to only update mesh with out solving for flow.  ( The original tutorial is developed by Julien Reveillon ).

Till then enjoy and watch out for new stuff.... :)

Flow over an aircraft using snappyHexMesh

Hi Guys,

Time to work on snappyHexMesh in OpenFOAM. To start with, need to mention about JC Puig whose tutorial I am referring (http://the-foam-house5.webnode.es/) . The tutorial provides a very brief introduction on using snappyHexMesh.

You can find the description of the geometry and mesh on his page. The basic requirements for using a snappyHexMesh in OF are : 

1. Need the geometry STL file, i.e. snappyHexMesh works with a  STerioLithography file which is widely available as an export in CAD softwares.

2. OpenFOAM case file, we can use the available motorBike case in OF to start up with so we need not make much changes to our file structure.

3. Using surfaceFeatureExtract command, to extract the surface feature in the geometry.

4.  creating a blockMesh for external domain

5. snappyHexMeshDict file for setting up the meshing parameters

6. and finally the solver 

Output after snappyHexMesh is used :

7. Solver used : simpleFOAM.

Velocity contour :

Pressure contour :

                             

                  

OpenFOAM v2.4.0 released

Hey Guys,

Check out the new version of OpenFOAM with lots of added improvements like different grading for blockMesh, higher order methods for interface capturing in mutiphase flows, scripts to create MPEG videos from .png images, clone foam cases and lots more. So time to switch to a improved version of OpenFOAM.

Download OF from : http://www.openfoam.org/download/

SALOME : impeller design

Salome : Free and Open source cad and meshing software. Today I tried using salome to model a impeller. The model was not an accurate design but an approximate to the actual one. Salome lacks a majot feature for blade designing i.e "loft". This was the only issue which I faced while creating the geometry.

Now let me explain you the steps in salome for making this design.

P.S. : The dimensions are in mm and other dimensions are just taken randomly.

Step 1.

In salome go to  " New Entities > 2D Sketch " and create a 2D image for the impeller as shown.

Step 2.

Click on the  " Reset Axis " to change the view of the sketch.

Create a face for the sketch using  " New Entity > Build > Face ".

Select the edges of the sketch and then click on Apply.

Step 3.

We need to revolve the face along an axis to complete the impeller design.

Go to " New Entity > Generation > Revolution ".

Click on the face and the axis along which we want to revolve and provide the input for revolution. In this case it is 360 deg.

Step 4.

Now we need to create the blades for the impeller.

Note that : The blades here are not having the perfectly aerofoil design shape as expected. The Salome seems to be lagging the lost function or may be I am not able to find it and hence its just an approximate design which I have come up with.

The thickness of the blade is 4mm and the top and bottom part of the blades are having a length of 58 mm and 80 mm.

To create the blade go to points and then create the points at the top surface of the impeller and at the bottom surface where the impeller blades cut the impeller.

Twist the bottom surface of the blade by and angle of 45 deg and having some curved surface.

STEP 5.

Similarly create a face for the blade and not extrude it along the Z axis.The blade has a thickness of 4 mm.

STEP 6.

To make multiple blades we need to create multiple copies of the blade. This can be done as follows :

Go to "Operation > Transformation > Multi-rotation"

Now create about 22 such copies of the blade with an angle of 25 deg in between each blade.

Now to make the geometry as a single model fuse the impeller and the blade using the fuse option. (" Operation > Boolean > Fuse ")

Save the mesh as impeller.msh (save it in ascii format)

This completes our geometry although not exact, but still an effort to create a impeller blade. I hope the loft option gets updated in the new release of Salome.( I am currently using Salome 7.2.0)

Meshing might take a while....so stay updated.. :)